What are flotation reagents?

Classification Of Flotation Reagents

By analyzing the chemical properties in the exploitation of non-ferrous metals, it can detect the varieties and physical and chemical properties of metal substances in the mine area in a short time, and optimize the mineral exploitation plan and scheme in combination with the corresponding material detection technology and demand.

In order to ensure the high efficiency of nonferrous metal mining quality, it is suggested that the mining personnel should select effective chemicals to adjust and optimize the use of chemicals according to local conditions.

First, the use of foaming agents. Foaming agent is a kind of common chemical agent. Its main performance is to detect the change of metal activity and physical and chemical properties.

Secondly, the regulator, which mainly presents the aggregation of granular floccules, to ensure the detection of metals.

Finally, collector, this kind of chemical flotation reagent is a common reagent, which is mainly used in the capture and collection of sulfide ore, non-polar mineral and metal deposit. Its corresponding flotation substances include xanthate, fatty acid, etc., and its main efficacy and treatment significance are as follows.

Foaming agent

In terms of material classification, there are two kinds of foaming agents: pure foaming agent and capture foaming agent. They are mainly used as drug control basis with the change of material surface activity.

Analyze the relevant chemical reactions and gas changes during the use of pharmaceuticals to detect and analyze substances in non-ferrous metal mines.

Generally speaking, it is carried out in the processing of non-ferrous metal beneficiation. The main effect of the foaming agent is to measure and analyze the metal exploration in the mining area by means of the tension of the bubbles.

Regulator

The modifier is the most common processing mode in the flotation reagent treatment, and it mainly shows the efficacy of the activator in the chemical detection reaction process.

Thousands of modifiers have strict dispersion characteristics, and they appear in the form of water glass, lime ions and organic matter during the exploration of the mining area.

It is very common to use modifiers in the detection of non-ferrous metal ore. It can exert special survey advantages. With the use of flotation reagents, the corresponding metals will appear as flocculation and aggregation of metal particles.

Collector

In the application of conventional flotation reagents, collectors are also widely used.

Due to the long-term burial of underground metal minerals, the underground materials are also gradually oxidized, and the investigation with the aid of collectors can enhance the overall mining intensity and capacity of the project. The technology is mainly used in sulfide ore, oxide ore and some precipitated metals.

And the selection of corresponding flotation reagents also includes yellow drugs, fatty acids, etc. These reagents will have obvious changes when they react with underground minerals. Therefore, analyzing the changes in the situation of collectors can also ensure the effectiveness and rationality of the survey. Finally, the mineral processing composition analysis and quantity identification of non-ferrous metals are completed.

Be sure to check back often, as we are in the process of adding new knowledge.

If you need immediate assistance, please contact us at the following:

EARTH TO SUN MINERAL PROCESSING EXPERT

Whatsapp:+86

Email:

In this article:
By analyzing the chemical properties in the exploitation of non-ferrous metals, it can detect the varieties and physical and chemical properties of metal substances in the mine area in a short time, and optimize the mineral exploitation plan and scheme in combination with the corresponding material detection technology and demand.
Share on social media:
Facebook
Twitter
LinkedIn
Telegram